Hazardous Area Enclosures Facilitate Plant Standards for Wireless Access Points

Hazardous Area Enclosures for Access Point
Hazardous area enclosures for wireless access point.
(Analynk)
There are often conflicts between what is needed and what is desired in many technical endeavors, and the field of industrial process control is no exception. Such a conflict between process engineers and IT managers was created by the incursion and popularity of wireless communication into the field of process measurement and control. It is, of course, a cooperative and friendly conflict, but a condition which may require some incompatible interests to be resolved.

For a number of reasons, compliance with certain norms set for the organization's wider scope and standards is advantageous for the wireless network equipment. Standardization on specific brands or hardware types can have true advantages. The tasks associated with network infrastructure back end management are less complicated when all equipment belongs to the same producer and family of products. Provisioning, which includes initial set-up, long-term management and management of unit losses, is simplified when all units are identical. The same objective is pursued by process technicians and operators in standardizing specific transmitters, valves or other parts that have various facilities throughout a plant.

The AE902-1 is designed to house the Aruba AP-318
The Analynk AE902-1 is designed to house the Aruba AP-318.
The problem occurs when the access point selected by the IT team, with all the latest standards, needs to be installed in a part of the plant categorized as hazardous (owing to the potential for flammable or explosive gases, vapors or dusts that can be ignited). There is a solution, actually a fairly simple one. Use a non-hazardous area access point (as specified or designated by the IT department) and installing it inside an access point enclosure designed for hazardous areas.

Analynk Wireless manufactures enclosures for industrial wireless access points installed in hazardous locations.  Each access point enclosure is provided with agency approved enclosures, antennas, mounting, penetrations, cabling, and power supplies. Their current product offering accommodates a wide range of wireless access point manufacturers including Symbol, Cisco, Meru, Aruba, HP, and Motorola.  Access point and Wi-Fi technology technologies change rapidly. Wireless component lifecycles are relatively short compared to other process equipment. The use of hazardous area access point enclosures provide flexibility and convenience in access point selection and upgrades.

For more information, contact Analynk Wireless by visiting https://analynk.com or by calling 614-755-5091.

Industrial Wireless Systems Radio Propagation Measurements

Radio frequency (RF) propagation measurements were conducted at three facilities representing a cross-section of different classes of industrial environments. Selected sites included a multi-acre transmission assembly factory typical of the automotive industry; a small-sized machine shop primarily engaged in metalworking located on the NIST campus in Gaithersburg; and a steam generation plant located on the NIST campus in Boulder. A spread spectrum correlation sounder was used to take the measurements at a continuum of points throughout the facility by fixing the transmitter and moving the receiver at a constant rate throughout each facility. The data collected from the RF propagation measurements of each site was analyzed. Analysis is based on channel impulse response (CIR) measurements collected during the measurement using equipment developed by the National Institute of Standards and Technology. The results of the analysis include a tabulated summary and detailed exploration of various industry accepted channel metrics such as path loss, delay spread, and K factor. Interpretation of the measurements contributes to an improved understanding of radio frequency propagation in factories and an additional perspective on deploying wireless communication devices within factories.

This technical paper, provided by the National Institute of Standards and Technology (NIST), addresses concerns about the lack of industrial wireless networking reliability, determinism, and security through a multi-phased approach.


Analynk Wireless
(614) 755-5091
https://analynk.com