Remote Monitoring of Valve Position

explosion proof battery powered industrial wireless transmitter
Battery powered industrial wireless transmitter
factory installed in hazardous area rated enclosure
with hazardous area rated antenna.
The use of a centralized control or monitoring station is prevalent throughout many industrial applications. Employing a single location as collector and processor of all available information has operational advantages. 

Operations with control valves installed at remote locations face the challenge of determining whether the valve is responding properly to control commands or the demands of the process. Older systems, and some not so old systems as well, may have in-place valves that do not provide a confirmation signal of valve position. Many products are available for retrofitting this capability to a wide range of existing valves, but the challenge of delivering the valve position signal to the control center remains. It is unlikely that spare signal cable conductors were installed at the time of valve installation, so there are two clear options.
  • Install signal cable from the valve position indicator to the control center.
  • Install a wireless signal transmission system for the valve position indicator.
Unless the valve is located very close to the control center, the wireless option offers a more simple and cost effective method of connecting the valve position transmitter with the control center. Here are the basic tasks.
  • Install transmitter at valve location in a suitable enclosure.
  • Provide power to radio transmitter. Almost any power source can be accommodated. Power consumption is low enough to allow the use of a small solar panel and battery arrangement, if needed.
  • Connect the valve position transmitter output to the radio transmitter input.
  • Install a companion radio receiver at the control center, or where a wired signal can be routed easily to the control center. Provide a suitable enclosure.
  • Provide power to the receiver, using any of the options available for the radio transmitter described previously.
  • Connect the output of the radio receiver to an appropriate input on the central control system.
  • Set the communications channels on the radio transmitter and receiver.
  • Power up the system.
The transmitter digitizes and encrypts the input signal from the valve position indicator, then transmits the data via 900 MHz or 2.4 GHz to the receiver. The receiver decrypts the data and mirrors the signal that was delivered by the valve position indicator to the radio transmitter. 

This is a simplified illustration, but the implementation of a wireless connection between process components, even with all the details, is not difficult. Transmitters and receivers can be ordered pre-configured, wired, and installed in a specified enclosure, requiring comparatively little field labor. Analynk welcomes customized application challenges and your questions about how to utilize wireless connections in your operation. 

Analynk Wireless manufactures equipment used to establish wireless process connections across the room, across the plant site, across the highway, and around the globe.

Hazardous Area Enclosure for Aurba Access Point... and Others

hazardous area wireless access point enclosure with antennas
AP623 Wireless access point enclosure
facilitates installation of commercial equipment
in hazardous industrial locations.
Analynk Wireless continues to expand its extensive line of wireless access point enclosures for hazardous industrial locations. The model AP623 is a recent addition, specially equipped to house the Aruba AP-314 dual band access point.

Analynk access point enclosures accommodate specific wireless access points from a range of manufacturers, facilitating easy installation. Every model includes UL listed explosion proof antennas, a mounting bracket custom tailored for the access point equipment, and RF cables to make the antenna connections. Enclosures have penetrations located to match up with the specified access point. Models are included to house a range of units from Symbol, Cisco, Meru, Aruba, HP, and Motorola, with more models added regularly to accommodate additional wireless access points.

Analynk Wireless specializes in industrial wireless communications. Your wireless communication challenges are welcome at Analynk, so make contact and share your requirements. Combining your process expertise with Analynk's product specialization will produce an effective solution.

The datasheet for the new model is provided below. You can see all the models and their companion access points on the Analynk site.


Product Options Match Wireless Equipment to Application

analynk wireless logo
Analynk Wireless offers a broad range of accessories, options, and custom configuration and design services to complement their standard product offering of industrial wireless equipment. The specialty offerings can be used to extend the suitability of a standard product for a specific application, or to create a complete package with all necessary mounting brackets, antennas, cables, and other ancillary equipment needed for a complete installation. Analynk extends the same customizing capability throughout its Telmar line of process measurement and control products, as well.

The company welcomes all inquiries related to custom configuration, accessories, and turnkey system design. Share your wireless connectivity or process measurement and control challenges with the experts and Analynk, combining your process knowledge and experience with their design expertise to develop an effective solution.


Rotary Vane Actuators for Quarter Turn Valve Automation

rotary vane actuator open for inside view
The inside of a rotary vane actuator
Image courtesy of Kinetrol
A rotary vane actuator is part of an automated valve assembly. Its role is to change the position of the valve trim, converting the motive force of fluid pressure in the actuator into torque at the valve stem.

Quarter turn valves are widely used in industrial fluid processes. Their application is primarily for operations requiring fully open or fully closed valve trim positions, although some do provide modulating service. A rotation of the valve stem through a 90 degree arc will reposition quarter turn valves between open and closed positions. A rotary vane actuator is well suited for driving this type of valve, with its own 90 degree arc of movement.

A rotary vane actuator is specific for application to quarter turn valves. A pressure tight housing contains a movable vane which is sealed to the sides of the pressure chamber by means of a low friction gasket. Inlets into the chamber on opposing sides of the vane allow a controller to produce a pressure differential across the vane. The vane will move, responding to the pressure differential, in either direction. A shaft is connected to the vane and the vane acts like a lever to rotate the shaft as the vane is moved by fluid pressure. The torque produced by the actuator assembly is primarily dependent upon the applied fluid pressure.

Hydraulic rotary vane actuators have the ability to handle large amounts of fluid and dynamic motions, exhibiting also qualities of durability and compactness. Pneumatic vane actuators use plant air pressure as the motive force. Both types generally have few moving parts and require little regular maintenance. A variety of typical automation accessories and options are available to customize a unit for a particular application.

Analynk Wireless manufactures wireless connectivity solutions for industrial applications and process control. Making cable free connections among process control equipment and instruments, across the room, across the property, across the globe.

Shell and Tube Heat Exchangers

interior view of shell and tube heat exchanger
View of the inside of a shell and tube heat exchanger shows
the tubes through which one of the transfer fluids passes.
Automobiles are part of the backbone of modern society, for both personal and commercial use. While being familiar everyday objects, they also contain systems which need to be constantly maintained and in-sequence to ensure the safety of both the machine and the driver. One of the most essential elements of car ownership is the understanding of how heat and temperature can impact a car’s operation. Likewise, regulating temperature in industrial operations, which is akin to controlling heat, is a key process control variable relating to both process operation and operator safety. Since temperature is a fundamental aspect of both industrial and consumer life, heat management must be accurate, consistent, and predictable. Many devices have been developed for the transfer of heat from one substance to another, with myriad applications throughout modern society.

A common design of heat exchangers used in the oil refining and chemical processing industries is the shell and tube heat exchanger. A pressure vessel, the shell, contains a bundle of tubes. One fluid flows within the tubes while another floods the shell and contacts the outer tube surface. Heat energy conducts through the tube wall from the warmer to the cooler substance, completing the transfer of heat between the two distinct substances. These fluids can either be liquids or gases. If a large heat transfer area is utilized, consisting of greater tube surface area, many tubes or circuits of tubes can be used concurrently in order to maximize the transfer of heat. There are many considerations to take into account in regards to the design of shell and tube heat exchangers, such as tube diameter, circuiting of the tubes, tube wall thickness, shell and tube operating pressure requirements, and more. In parallel fashion to a process control system, every decision made in reference to designing and practically applying the correct heat exchanger depends on the factors present in both the materials being regulated and the industrial purpose for which the exchanger is going to be used.
schematic of shell and tube heat exchanger
Schematic of shell and tube heat exchanger


The industrial and commercial applications of shell and tube heat exchangers are vast, ranging from small to very large capacities. They can serve as condensers, evaporators, heaters, or coolers. You will find them throughout almost every industry, and as a part of many large HVAC systems. Shell and tube heat exchangers, specifically, find applicability in many sub-industries related to food and beverage: brewery processes, juice, sauce, soup, syrup, oils, sugar, and others. Pure steam for WFI production is an application where special materials, like stainless steel, are employed for shell and tube units that transfer heat while maintaining isolation and purity of a highly controlled process fluid.

Shell and tube heat exchangers are rugged, efficient, and require little attention other than periodic inspection. Proper unit specification, selection, and installation contribute to longevity and solid performance.

Analynk Wireless manufactures wireless connectivity solutions for industrial applications and process control. Making cable free connections among process control equipment and instruments, across the room, across the property, across the globe.

Pyrometers

high temperature industrial process for pyrometer temperature measurement
Pyrometers permit temperature measurement without contact
Non-contact measurement technology allows process operators and technicians to evaluate the temperature of process materials, machinery, or piping by measuring their electromagnetic radiation. Through inferential calculation and one or more radiation measurements, specialized instruments can determine temperature without contacting the subject material or surface. While the concept of non-contact measurement technology has existed for many years, more recent advancements in non-contact temperature sensing and the evolution of the pyrometer have allowed temperature measurement at a distance to become popular throughout industrial process operations.

Pyrometers can commonly concentrate light from an object onto a temperature sensing element. The sensed elevation in temperature is proportional to the infrared optical energy. Different instruments may have varying arrangements of concentrating lenses and sensors, but the operating principle is the same. The physical law behind the pyrometer’s operating principle operates on an exponential mathematical basis that is non-linear. This results in one of the limitations of the pyrometer. A single pyrometer can only, with high accuracy, deliver a comparatively narrow range of target temperature. If the need for accuracy is reduced, the applicable temperature range widens. Innovative manufacturers have developed instruments with technology and features overcoming many of the limitations imposed by the physics, delivering instruments with accuracy and applicable temperature range usable in a wide array of applications.

One of the advantages to using a non-contact pyrometer is that their calibration is independent of the distance between the sensor and the object being evaluated. This phenomenon is due to the fact pyrometers have a field of view and can be filled with the target object in a way independent of distance. While the radiation emanating from the target object may be decreasing, the field of view of the pyrometer is measuring a greater portion of the object which is proportional to the amount of radiation being lost, essentially canceling out the distance and allowing the pyrometer to provide useful output. An example of a practical application of a pyrometer in industry would be its use to check the temperature of a ventilation system in the HVAC field.

Share your temperature measurement requirements and challenges with process instrumentation specialists. Their product application expertise will combine with your own process knowledge and experience to produce an effective solution.

Analynk Wireless manufactures wireless connectivity solutions for industrial applications and process control. Making cable free connections among process control equipment and instruments, across the room, across the property, across the globe.

Hazardous Area Antennas Now Carry NEMA 4X Rating

hazardous area antenna for industrial wireless communications
The CTX and CTM antennas for industrial wireless
communications now carry a NEMA 4X rating
Analynk is well known in the industrial wireless communications field for its hazardous area antennas. Recently, certification was received as RoHS compliant. Analynk has now achieved a NEMA 4X rating for the CTM and CTX hazardous area explosion proof antennas, further expanding the range of applications and solidifying the product's reputation for high performance and ruggedness.

Data sheets for both the CTM and CTX series antennas are provided below, but sharing your industrial wireless communications challenges with the experts at Analynk Wireless is always the best path to an effective solution.