Severe Service Valves

Careful matching of process valves to intended use
results in better and longer service

Industrial process control applications can be associated with some very stringent and challenging performance requirements for the physical equipment and components that are part of the process chain. In fluid based operations, the control and shutoff valves can be a significant impact point of extreme fluid conditions, requiring careful design and selection consideration to assure proper performance and safety levels are predictably maintained.

Industrial valves that are intended for application at the extremes are generally referred to as severe service valves. While there are plenty of published and accepted standards for industrial valves, one does not exist to precisely define a severe service valve. There is, however, some movement toward the development of severe service standards in some industry segments.

So, how do you know when to focus valve selection activities on severe service valves, as opposed to general purpose valves? There are a number of basic criteria that might point you in that direction:

• Very extreme media or environmental temperature
• High pressure drop operation that may cause cavitation
• Rapid and extreme changes to inlet pressure
• Certain types or amounts of solids contained in the fluid
• High number of mechanical operations
• Thermal cycling

Certainly, any of these criteria might be found in an application serviceable by a general purpose valve, but their presence should be an indicator that a closer assessment of the fluid conditions and commensurate valve requirements is in order. The key element for a process stakeholder is to recognize when conditions are in evidence that might overrun the capabilities of a general purpose valve, leading to premature failure in control performance or catastrophic failure that produces an unsafe condition. Once the possibility of a severe service condition is identified, a careful analysis of the possible operating conditions will reveal the performance requirements for the valve.

There are numerous manufacturers of severe service valves, each seeming to concentrate on a particular niche. You can always get more information, or discuss your special requirements, with a valve specialist. They have access to technical resources that can help with selecting the right valve configuration to meet your severe service applications.

Analynk Wireless designs and manufactures equipment that establishes wireless connections among process measurement and control devices.

Wireless Temperature Monitoring System Assures Safety in Firefighter Training Facility

Firefighters training at a burn building
Courtesy Fire Facilities

Fire Facilities designs and manufactures live firefighting training towers and buildings, referred to as burn buildings. Firefighters train in these structures honing their personal skills and developing team strategies for combating fires under live burn conditions. The training, because of the live fire in the structure, can be dangerous. Procedures and equipment are in place to minimize the risk posed to the training professionals.

Analynk Wireless designed and manufactures part of the safety and monitoring system for the Fire Facilities training structures. The system is suitable for worldwide use, as are the training structures. Sixteen temperature monitoring locations are established in the structure and monitored using the pyrometer developed by Analynk. The monitoring station provides alarm notification if the temperature in any of the monitored zones exceeds the level at which trainees can safely enter the area.

• Monitor up to 16 channels of thermocouple input
• Local temperature display on touchscreen HMI
• Audible and flashing local alarm, plus relay contacts for connection of external devices
• WiFi connection to smart phone or tablet for remote viewing of all operating information
• Data logging of each channel to USB drive
• Cloud connection for view access from anywhere with an internet connection
• Email and text alerts
• Monitoring station has NEMA 4 rating and is suitable for installation and operation in environments to -40 degrees

The Fire Facilities Pyrometer is another example of Analynk's capabilities in designing and building engineered products for specific applications. Share your process control product development challenges with the experienced professionals at Analynk, combining your concept with their design and engineering expertise to develop top flight product solutions.

Case Study From CSB - Industrial Plant Heat Exchanger Failure

Shell and tube heat exchangers at industrial plant

Industrial accidents, whether minor or catastrophic, can serve as sources of learning when analyzed and studied. Operators, owners, and technicians involved with industrial chemical operations have a degree of moral, ethical, and legal responsibility to conduct work in a reasonably and predictably safe manner without endangering personnel, property, or the environment. Part of a diligent safety culture should include reviewing industrial accidents at other facilities. There is much to learn from these unfortunate events, even when they happen in an industry that may seem somewhat removed from our own.

The U.S. Chemical Safety Board, or CSB, is an independent federal agency that investigates industrial chemical accidents. Below, find one of their video reenactments and analysis of an explosion that occurred at a Louisiana chemical processing plant in 2013. A portion of the reenactment shows how a few seemingly innocuous oversights can combine with other unrecognized conditions that result in a major conflagration.

Check out the video and sharpen your sense of awareness for potential trouble spots in your own operation.

Industrial Wireless Communications Using a Single Transmitter and Multiple Receivers

Water treatment plant

In planning a wireless installation for connecting process measurement instruments and equipment to monitoring and control stations, keep in mind that it is not necessary to maintain a one-to-one relationship among receivers and transmitters. A transmitter broadcasts the process signal on a designated channel. All the receiving devices set to that channel will receive the 256 bit encrypted signal. Each can decrypt the signal and convert the value to a common industrial analog signal for use as needed. The key takeaway is to recognize that once the process signal is transmitted, you have the ability to receive and use the signal anywhere within range of the transmitter. Effective range can extend from a few feet to several miles.

The beneficial applications for industrial wireless are limited only by your imagination and ingenuity. Share your ideas and challenges with the industrial wireless experts at Analynk, combining your own process knowledge with their application expertise to develop an effective solution.

Wireless Communications For Process Control

The incidence of wireless connections between process measurement devices and their monitoring and control stations has been expanding for years, with costs receding and performance increasing. Designers, engineers, and operators of industrial processes and facilities continue to find new applications and create continuous wireless connections to devices and equipment that were previously isolated by distance or other barriers. They are also saving cost, promoting flexibility, and reducing "clutter" in facilities by eliminating cables, conduits, and junction boxes previously used to transmit measurement signals between instruments and control or recording gear.

Analynk Wireless builds the wireless transmission and receiving equipment needed to establish connections among your process measurement and control equipment and instruments. Transmitters, receivers, and repeaters that are rugged and uncomplicated in their application. Share your wireless connectivity challenges with the experts at Analynk, combining your process knowledge with their technical expertise to develop an effective solution.

New Wireless Access Point Enclosure For Hazardous Areas

New Model AP622 Access Point Enclosure

Analynk manufactures enclosures for industrial wireless access points, facilitating their installation in hazardous locations. Each access point enclosure is specifically targeted and designed to provide easy installation of specific wireless access points from a range of manufacturers. Every model is provided with UL listed explosion proof antennas, a mounting bracket designed for the target access point, and RF cables to make the antenna connections. Enclosures have penetrations specifically located to accommodate the target access point.The current offering accommodates a range of units from Symbol, Cisco, Meru, Aruba, HP, and Motorola, with more models added regularly to accommodate additional wireless access points.

The newly added AP622 is designed for the Aruba AP-304 dual band access point. Analynk Wireless specializes in industrial wireless communications. Your wireless communication challenges are welcome at Analynk, so make contact and share your application requirements. Combining your process expertise with Analynk's product specialization will produce an effective solution.

The datasheet for the new model is provided below. You can see all the models and their companion access points on the Analynk site.

Hazardous Area Wireless Access Point Enclosure from Analynk Wireless, LLC

Preventing Cavitation in Process Control Valves

Special valve trim can help prevent
cavitation
Courtesy Flowserve - Kammer

Cavitation in process control valves results from a rapid drop in pressure as liquid passes through the valve. The condition results in the formation of vapor spaces or bubbles within the valve cavity. When the bubbles move downstream into a larger cross-sectional area, velocity decreases and liquid pressure increases. The higher pressure now surrounding the bubbles causes them to implode, producing shockwaves which propagate through the liquid. These shockwaves can cause metal fatigue and excessive wear on the internals of the valve. The collapsing bubbles also make a discernible sound with accompanying vibration. The cumulative effects of cavitation can cause rapid deterioration of valve internals, resulting in reduced control function, frequent need for service, or premature failure.

There are ways to mitigate cavitation. Some involve changes in the process, others, incorporating a properly designed and selected valve with trim that reduces or prevents the conditions that cause cavitation. The paper below is authored by Flowserve, a globally recognized manufacturer of process control valves under several brand names, and provides an in depth examination of the causes of cavitation, then continues with explanation of how their specialty valves are designed to overcome the conditions that promote it. At Analynk Wireless, we are not in the valve business, but recognize many of our customers operate fluid processes and would find the knowledge useful. There are detailed illustrations showing specific valve trim features that impede cavitation.

Analynk Wireless manufactures a comprehensive line of wireless receivers, transmitters, and accessories that enable process operators to establish signal connections across the room, across the plant, and across the globe.

Cavitation Control in Process Control Valves from Analynk Wireless, LLC